• ✔ RADAR SENSOR MOTION: When people or object enter the sensor range(sensing distance: 6-10 meters), the light will work at full brightness, and when they leave the sensing range, the light will work at a low wattage of 3w.
• ✔ REASONABLE DESIGN: Frosted cover for anti-glare eye protection, improve the appearance of products by allowing colors to appear clear, vivid. Aluminum shell provides excellent insulation and the white inner wall improves the light effect by reflecting light. No mercury,no ultraviolet rays radiation, no strobe, protect your eyes.
• ✔ WIDE APPLICATION: Widely used for residential, commercial or industrial use, like warehouse, parking lot, garage，basement , Corridor, Walkway, Yard Hallway, Patio, Carport,Porch, Attic Home.
• ✔ ENERGY SAVING: Microwave Radar Motion Sensor T8 LED Tube Light, Produce 1800 LUX equivalent to 40watt florescent bulbs, Lighting up any corner of your space. In addition, cut down more than 50% bill of electricity, is the best choice for saving power.

Features:
Mode: 100% light on once detect any movemen, 30% light on when no movement.
LightingWill T8 LED Tube Light provides high performance, long life and energy savings in a simple, conventional looking fixture.
They can easily be replaced with any existing fixtures.
High quality material and reasonable design, they are not breakable and won't release the potentially harmful gas while fluorescent bulbs do.

Specification:
◆ Tube Type: T8
◆ Base Type: G13
◆ Tube Length: 4Feet
◆ Luminous Flux: 1800Lum
◆ Luminous Efficiency: >100LM/W
◆ Sensor Angle
◆ Sensing Distance: 6-10 Meters
◆ Color temperature: Daylight 5500K-6000K
◆ Input voltage: 85-265V
◆ Wattage: 18W
◆ Beam Angle: 160°
◆ Delay Time: 30 Seconds
◆ Color Rendering Index: 90
◆ Material type: Aluminum + PC
◆ Dimmable: Non-dimmable
◆ Operate temperature: (-25℃ to 50℃ )
◆ Power Feed: Dual-end power in（default)
◆ Certification: RoHS, CE, FCC
◆ Life span: 50000 hours
◆ Warranty: 2 years

Installation Guide
1.Make sure the tube fixture is in power failure.
2.Remove the T8 fluorescent tube.
3.Disconnect wires to ballast and starter(for inductance ballast tube).
4.Install LightingWill T8 LED Tube Light.
5.Reconnect wires in the circuit.

The Reason for choosing LED Tube Light:
• Reduce your electricity bill and save money
• Help preserve the environment by reducing carbon footprint
• New technology provides increased lifespan compared to less-efficient incandescent