How to install the floor cage of solar lights ?

The construction personnel may be responsible for questioning the unreasonable choice of the installation site according to the situation on the construction site and stop the constuction , and report the situation to the relevant person in charge withn the first time, Rectification must be completed within a time limit, in accordance with actual  construction standards. The installation steps of the solar street lamp base cage are as follows:

1. Excavate pits along the road in strict accordance with the size of the solar street lamp foundation map (the construction size is determined by the construction personnel)

2. In the foundation , the upper surface of the ground cage msut be level (measured and tested with a level)and thed anchor bolts in the ground cage must be perpendicular to the upper surface of the foundation (measured and detected with a square ruler）.

3. After the pit is excavated ,leaved it for 1 to 2 days to see if there is ground water seepage.If there is ground water see page, stop construction immediately. 

4. Before the construction, prepare the tools required for the foundation of the solar street lamp and select construction personnel with construction experience. 

For more detail please contact :joe@tonghuilighting.cn ,vicky@tonghuilighting.cn

Telephone No. : 0086-15753273917, 0086-15318718647